البرنامج يعمل والروابط كلها تعمل ولسرعة التحميل حمل من اي روابط فهي بنفس التقسيم و لتفعيل الكراك
بعد فك الضغط اذهب للملف
ans12_licgen
ثم للملف ANSYS.DAT
وضع بدل كلمة HOST اسم الكمبيوتر وبدل 00000000000 عنوان ال network ip ,وتستطيع الحصول عليه من
Windows 2000/XP
Click Start » Run » type: cmd » click OK
In the black window, type: ipconfig /all
Write down the twelve-digit Physical Address


ثم اضغط keygen.bat سيترتب الكراك في ملف license.dat
و عندما يطلب البرنامج الملف اشر له الى ال license.dat

بالتوفيق

http://rapidshare.com/files/213226237/ANSYS_12.part01.rar
http://rapidshare.com/files/213229188/ANSYS_12.part02.rar
http://rapidshare.com/files/213232162/ANSYS_12.part03.rar
http://rapidshare.com/files/213235202/ANSYS_12.part04.rar
http://rapidshare.com/files/213238431/ANSYS_12.part05.rar
http://rapidshare.com/files/213241386/ANSYS_12.part06.rar
http://rapidshare.com/files/213244471/ANSYS_12.part07.rar
http://rapidshare.com/files/213247609/ANSYS_12.part08.rar
http://rapidshare.com/files/213251492/ANSYS_12.part09.rar
http://rapidshare.com/files/213255006/ANSYS_12.part10.rar
http://rapidshare.com/files/213258643/ANSYS_12.part11.rar
http://rapidshare.com/files/213262137/ANSYS_12.part12.rar
http://rapidshare.com/files/213265888/ANSYS_12.part13.rar
http://rapidshare.com/files/213269817/ANSYS_12.part14.rar
http://rapidshare.com/files/213273550/ANSYS_12.part15.rar
http://rapidshare.com/files/213277236/ANSYS_12.part16.rar
http://rapidshare.com/files/213281425/ANSYS_12.part17.rar
http://rapidshare.com/files/213285425/ANSYS_12.part18.rar
http://rapidshare.com/files/213289707/ANSYS_12.part19.rar
http://rapidshare.com/files/213293997/ANSYS_12.part20.rar
http://rapidshare.com/files/213298163/ANSYS_12.part21.rar
http://rapidshare.com/files/213302505/ANSYS_12.part22.rar
http://rapidshare.com/files/213306767/ANSYS_12.part23.rar
http://rapidshare.com/files/213310945/ANSYS_12.part24.rar
http://rapidshare.com/files/213315255/ANSYS_12.part25.rar
http://rapidshare.com/files/213319490/ANSYS_12.part26.rar
http://rapidshare.com/files/213323763/ANSYS_12.part27.rar
http://rapidshare.com/files/213328081/ANSYS_12.part28.rar
http://rapidshare.com/files/213332767/ANSYS_12.part29.rar
http://rapidshare.com/files/213223409/ANSYS_12.part30.rar


وبروابط اخرى




30 http://uploadbox.com/files/HXWJ0sz8sD
29 http://uploadbox.com/files/NyOoPDxpGc
28 http://uploadbox.com/files/domUagNdfS
27 http://uploadbox.com/files/xrSYPNuURj
26 http://uploadbox.com/files/Ww7OLXbqYV
25 http://uploadbox.com/files/fpa2wigHu7
24 http://uploadbox.com/files/9WvL0u4Lw9
23 http://uploadbox.com/files/exyYsOYJw7
22 http://uploadbox.com/files/yAsEiFe9Uy
21 http://uploadbox.com/files/wSZYqxbiMc
20 http://uploadbox.com/files/62Cbrlusyt
19 http://uploadbox.com/files/OuUYZbjb6b
18 http://uploadbox.com/files/2eFkAqpIza
17 http://uploadbox.com/files/q2CKbFrCMy
16 http://uploadbox.com/files/UQp8dabCBu
15 http://uploadbox.com/files/2Fvwz6AgaD
14 http://uploadbox.com/files/WFh9YL3OJY
13 http://uploadbox.com/files/NEiOJAJ6e8
12 http://uploadbox.com/files/iJjCdlaX2k
11 http://uploadbox.com/files/hCIgFEW1Ym
10 http://uploadbox.com/files/6ZcXESuHm1
09 http://uploadbox.com/files/51GnKMbmZJ
08 http://uploadbox.com/files/MCI9JmEgPo
07 http://uploadbox.com/files/Wyzr0lGM2w
06 http://uploadbox.com/files/105b89383b
05 http://uploadbox.com/files/c530d1d3ab
04 http://uploadbox.com/files/10e264a02d
03 http://uploadbox.com/files/fa68435fe2
02 http://uploadbox.com/files/84fd449ae1
01 http://uploadbox.com/files/f87c540bac


و روابط اخرى




http://depositfiles.com/files/yjffgqy57- ANSYS_12.part30.rar
http://depositfiles.com/files/opxezwfck- ANSYS_12.part29.rar
http://depositfiles.com/files/4rtwv4tkr- ANSYS_12.part28.rar
http://depositfiles.com/files/dime2rrxx- ANSYS_12.part27.rar
http://depositfiles.com/files/2px6tvsff- ANSYS_12.part26.rar
http://depositfiles.com/files/ztaj8r80c- ANSYS_12.part25.rar
http://depositfiles.com/files/smu0tgjey- ANSYS_12.part24.rar
http://depositfiles.com/files/gsqbqn6hu- ANSYS_12.part23.rar
http://depositfiles.com/files/ctfu46yqk- ANSYS_12.part22.rar
http://depositfiles.com/files/larvc6awk- ANSYS_12.part21.rar
http://depositfiles.com/files/6i4rhrp3m- ANSYS_12.part20.rar
http://depositfiles.com/files/r0153an07- ANSYS_12.part19.rar
http://depositfiles.com/files/c6hw9wgm2- ANSYS_12.part18.rar
http://depositfiles.com/files/prqhws704- ANSYS_12.part17.rar
http://depositfiles.com/files/24hceluea- ANSYS_12.part16.rar
http://depositfiles.com/files/b0b40j2qe- ANSYS_12.part15.rar
http://depositfiles.com/files/6ur6bcrkd- ANSYS_12.part14.rar
http://depositfiles.com/files/n6bosn93e- ANSYS_12.part13.rar
http://depositfiles.com/files/bgm9ss1cq- ANSYS_12.part12.rar
http://depositfiles.com/files/xluqbqqij- ANSYS_12.part11.rar
http://depositfiles.com/files/u1y2ejdmm- ANSYS_12.part10.rar
http://depositfiles.com/files/ad9o32zl3- ANSYS_12.part09.rar
http://depositfiles.com/files/0lksy413y- ANSYS_12.part08.rar
http://depositfiles.com/files/acs9cwm3t- ANSYS_12.part07.rar
http://depositfiles.com/files/zleemrmow- ANSYS_12.part06.rar
http://depositfiles.com/files/di14a3aal- ANSYS_12.part05.rar
http://depositfiles.com/files/y9t573omb- ANSYS_12.part04.rar
http://depositfiles.com/files/80mmokphr- ANSYS_12.part03.rar
http://depositfiles.com/files/n5wu278si- ANSYS_12.part02.rar
http://depositfiles.com/files/jt9pc1way- ANSYS_12.part01.rar

بارك الله فيك وجزاك كل خير

لاستمرار التحليل

جزاك الله كل خير يا ريت انا بدور على ANSYSCIVILFEM V-11 OR V-12 ويبقى كتر الف خيرك

بارك الله فيك على هذا المجهود القيم وياريت لو احد الاخوان يشوف تنصيبه وعمله وشنو الاشياء الاضافية قبل لا نقوم بتحميله
تحياتي

مشكووووووووووووور لكن النت بطيء اليوم لم استطع التحميل

بارك الله فيك على هذا المجهود القيم وياريت لو احد الاخوان يشوف تنصيبه وعمله وشنو الاشياء الاضافية قبل لا نقوم بتحميله
تحياتي

اني شايفة و مجربة و لا تدوخ و هسة ادز تعليم الكراك بالعربي و بطريقة ثانية

1 بعد فك الضغط ثبت الانسز بشكل كامل
2 من ابدء اذهب الى الانسز و من ثم الى ANSLIC_ADMIN Utility و اختار Display the License Server Machine Hostid
3 اخذ اسم host و flex id
4 افتح المجلد ans12_licgen
5 ا فتح الملف ansys.dat باستخدام المفكرة
6 أول خط في ansys.dat اكتب عوضا عن كلمة هوست و ضع مكان الاصفار 000000000000 رمز ال flexid
7 اعمل حفظ للملف ansys.dat
8 تشغيل keygen.bat ، الحصول على ترخيص license.dat
9 فتح الملف ansyslmd.ini باستخدام المفكرة
10 اسم الهوست لكمبيوترك SERVER=1055@
اسم الهوست لكمبيوترك ANSYSLI_SERVERS=2325@

11 حفظ ansyslmd.ini
12 وضع ansyslmd.ini في C: \ Program Files \ ANSYS Inc \ Shared Files \ Licensing
13 من ابدء اذهب Server ANSLIC_ADMIN Utility واختار Install the License File واجعله يختار license.dat الموجود في المجلد ans12_licgen
14 اذهب للملف C: \ Program Files \ ANSYS Inc \ v120 \ fluent \ license \ win64 و اعمل رن للملف Client_License_install-win64-2.0.exe
15 في الفراغ الاخير ضع اسم الهوست و اعمل انستل

و تدلل

مشكووووووووووووووووووووووووووووووور

اتمنى لكم الموفقية

شكرا جززززززززززززيلا اخ structural وما قصرت

هل من الممكن التوضيح اكثر حول الخصائص الجديدة الموجودة في البرنامج

ANSYS 12.0 New Features
ANSYS 12.0 delivers innovative, dramatic simulation technology advances in every major physics discipline, along with improvements in computing speed and enhancements to enabling technologies such as geometry handling, meshing and post-processing. These advancements alone represent a major step forward on the path forward in Simulation Driven Product Development.

» ANSYS Workbench 2.0
» Geometry & Meshing
» Multiphysics
» Structural Mechanics

» Fluid Dynamics
» Simulation Process & Data Management
» Applications
» Explicit Dynamics


ANSYS Workbench 2.0
The ANSYS Workbench environment is the glue that binds the simulation process; this has not changed with version 2.0. In ANSYS 12.0, while the core applications may seem familiar, they are bound together via the innovative project page that introduces the concept of the project schematic. This expands on the project page concept. These advancements alone represent a major step forward on the path towards Simulation Driven Product Development.




More-complex analyses involving multiple physics can be built up by connecting systems. Data dependencies are indicated clearly as connections. State icons at the right of each cell indicate whether cells are up to date, require user input or need to be updated - for example, whether they are just meshed or fully solved.


In addition to serving as a framework for the integration of existing applications, the ANSYS Workbench 2.0 platform also serves as an application development framework and will ultimately provide project-wide scripting, reporting, a user interface (UI) toolkit and standard data interfaces. These capabilities will emerge over this and subsequent releases. At ANSYS 12.0, Engineering Data and ANSYS DesignXplorer are no longer independent applications: They have been re-engineered using the UI toolkit and integrated within the ANSYS Workbench project window.


Two analyses from the schematics shown in the previous figure are shown here
in the mechanical simulation application. Launched from the schematic,
individual applications will be familiar to existing users


ANSYS Workbench 2.0 represents a sizable step forward in engineering simulation. Within this innovative software framework, analysts can leverage a complete range of proven simulation technology, including common tools for CAD integration, geometry repair and meshing. A novel project schematic concept guides users through complex analyses, illustrating explicit data relationships and capturing the process for automating subsequent analyses. Meanwhile, its parametric and persistent modeling environment in conjunction with integral tools for design optimization and statistical studies enable engineers to arrive at the best designs faster.

Geometry & Meshing
ANSYS has combined rich geometry and meshing techniques with its depth of knowledge and experience, resulting in integrated geometry and meshing solutions that share core libraries with other applications.

At ANSYS 12.0, geometry interfaces have been enhanced to import more information from CAD systems, including new data types such as line bodies for modeling beams, additional attributes such as colors and coordinate systems, and improved support for named selections created within the CAD systems. For pre-processing larger models, release 12.0 includes support for 64-bit operating systems and smart and selective updates of CAD parts.

Geometry modeling in the ANSYS Workbench environment is greatly improved to provide increased automation, greater flexibility and improved ease of use for the task of preparing geometry for analysis. Merge, Connect and Project features have been added for improved surface modeling in ANSYS 12.0.



New tools automatically detect and fix typical problems, such as small edges, sliver faces, holes, seams and faces with sharp angles. Geometry models can now be prepared for analysis at a much faster pace. These images show an aircraft model before (top) and after (bottom) cleanup.


A primary focus for ANSYS 12.0 has been to provide an automated meshing solution that is best in class for fluid dynamics. With the addition of capabilities from GAMBIT and TGrid meshing applications, major improvements have been made in the automatic generation of CFD-appropriate tetrahedral meshes with minimal user input. Advanced size functions (similar to those found in GAMBIT), prism/tet meshing (from TGrid) and other ANSYS meshing technologies combine to provide improved smoothness, quality, speed, curvature and proximity feature capturing, and boundary layer capturing. Though many of these enhancements were driven by fluid dynamics needs, they also benefit users of other types of simulation. For example, users performing structural analyses will benefit from the improved automation and mesh quality.



Using the new MultiZone mesh method, a user can mesh complicated models with a pure hex mesh without the need for geometry decomposition. This brake rotor example can be meshed with a pure hex mesh in a single operation.


Multiphysics
ANSYS 12.0 expands the company’s industry-leading comprehensive multiphysics solutions. New features and enhancements are available for solving both direct and sequentially coupled multiphysics problems, and the ANSYS Workbench framework makes performing multiphysics simulations even faster than before.


Sequence of images showing simulation of the motion of a screw pump solved using immersed solid fluid structure interaction


The integration of the broad array of ANSYS solver technologies has taken a considerable step forward with release 12.0. The ANSYS Workbench environment has been redesigned for an efficient multiphysics workflow by integrating the solver technology into one unified simulation environment.

ANSYS 12.0 extends the distributed sparse solver to support unsymmetric and complex matrices for both shared and distributed memory parallel environments. This new solver technology dramatically reduces the time needed to perform certain direct coupled solutions including Peltier and Seekbeck effects as well as thermoelasticity. Another exciting new capability is the new family of direct coupled-field elements is available in ANSYS 12.0; these new elements enable the modeling of fluid flow through a porous media.

Another new enhancement to the ANSYS Workbench framework is the support for direct coupled-field analysis. Relevant direct coupled-field elements (SOLID226 and SOLID227) are now natively supported in the ANSYS Workbench platform for thermal–electric coupling. There is a new analysis system for thermal–electric coupling that supports Joule heating analysis with temperature-dependent material properties and advanced thermoelectric effects, including the Peltier and Seebeck effects. The applications for this new technology include Joule heating of integrated circuits and electronic traces, busbars, and thermoelectric coolers and generators.


The thermoelectric analysis was performed in the ANSYS Workbench
environment, the model was courtesy of WEG Electrical Equipment.


One of the major enhancements for fluid structure interaction (FSI) is a new immersed solid FSI solution. This technique is based on a mesh superposition method in which the fluid and the solid are meshed independently from one another. The solution enables engineers to model fluid structure interaction of immersed rigid solids with imposed motion. Another new capability for fluid structure interaction in ANSYS 12.0, FLUID136 now solves the nonlinear Reynolds squeeze film equations for nonlinear transient FSI applications involving thin fluid films. Version 12.0 offers another exciting new FSI capability: the ability to perform one-way fluid structure interaction using ANSYS FLUENT software as the CFD solver. This capability enables one-way load transfer for surface temperatures or surface forces between ANSYS FLUENT and ANSYS mechanical products based on ANSYS CFXPost.

Structural Mechanics
The ability to drive the engineering design process in structural applications has taken a significant step forward with the improvements in release 12.0. New features and tools, many integrated into the ANSYS Workbench platform, help reduce overall solution time. Specific improvements focus on elements, materials, contact and solver performance, along with linear, rigid, and flexible dynamics.



Crack tip analysis of a turbine blade
Geometry courtesy PADT

The most notable new element in release 12.0 is the four-noded tetrahedron for modeling complex geometries in hyperelastic or forming applications. This reduces the time it takes to develop an analysis from geometry through solution, while maintaining the accuracy of the solution. In regards to materials, Release 12.0 introduces several additions to the wide choice of materials already available.

As assemblies have become a de facto standard in simulation, the need for advanced contact features has grown accordingly. ANSYS 12.0 developments include a number of additional contact modeling features as well as significant improvements in solving contact problems. Solver performance has improved in many different areas. ANSYS 12.0 introduces a new modal solver, called SNODE, that increases the speed of computation for problems with a large number of modes — in the realm of several hundred — on large structures that typically have over a million degrees of freedom.


Instability analysis for brake squeal

At release 12.0, improvements to both the ANSYS Rigid Dynamics product and flexible dynamics capabilities in ANSYS Structural, ANSYS Mechanical and ANSYS Multiphysics software make the job of creating new mechanisms a faster one. A number of improvements to data and process handling increase ease of use for ANSYS Rigid Dynamics simulations. Flexible dynamics capabilities found in ANSYS Structural, ANSYS Mechanical and ANSYS Multiphysics products benefit at release 12.0 from robust component modal synthesis, or CMS.

Fluid Dynamics
ANSYS 12.0 introduces the full integration of its fluids products into ANSYS Workbench together with the capability to manage simulation workflows within the environment. This allows users — whether they use ANSYS CFX or ANSYS FLUENT software (or both) — to create, connect and re-use systems; perform automated parametric analyses; and seamlessly manage simulations using multiple physics.



Simulation results for the flow inside a cylinder in an internal-combustion engine

ANSYS continues to make progress on basic core solver speed, a benefit to all users for all types of applications, steady or transient. A suite of cases that span the range of industrial applications has consistently shown increases in solver speed of 10 to 20 percent, or even more, for both ANSYS CFX and ANSYS FLUENT software.

The perennial goal of improving accuracy without sacrificing robustness motivated numerous developments, including new discretization options such as the bounded second-order option in ANSYS FLUENT and the iteratively-bounded high-resolution discretization scheme in ANSYS CFX. Being able to consistently use higher order discretization schemes means that users will see further increases in the accuracy of flow simulations without penalties in robustness.


Fuel injector model with close-ups of mesh and of vapor volume fraction contours at the injector surface

Ease of use has been enhanced in various ways. Most noticeably, the ANSYS FLUENT user interface has taken a significant step forward by adopting a single-window interface paradigm, consistent with other applications integrated in ANSYS Workbench. For ANSYS CFX software, a host of improvements has been added to the graphical user interface (GUI). There is a completely new capability that allows users to customize GUI appearance, including the option to create additional input panels. These custom panels provide the ability to encapsulate best practices and common processes by giving the user control over GUI layout and required input.

Simulation Process & Data Management
In today’s global environment, the ongoing integration of simulation and product design makes effective collaboration and communication essential for successful product development. ANSYS Engineering Knowledge Manager (EKM) solutions are aimed at meeting simulation process and data management (SPDM) challenges faced by the simulation/CAE community. ANSYS EKM addresses issues such as how to better manage, share and re-use simulation data and how to better capture and re-use the engineering expertise that a simulation result represents.

ANSYS EKM is a truly scalable solution with three versions: ANSYS EKM Desktop, ANSYS EKM Workgroup and ANSYS EKM Enterprise. These versions provide entry points for the individual user, the workgroup or the entire enterprise, each with increasing capabilities and features.

ANSYS EKM Desktop is a single-user, local environment version of the ANSYS EKM product. It is available as part of ANSYS 12.0 and can be accessed via the ANSYS Workbench environment. ANSYS EKM Desktop is focused at meeting the challenge of “reusing existing simulations” by offering simulation data search, retrieval, and reporting features that can increase simulation productivity and efficiency.

Applications
ANSYS Emag - As the combined development teams from Ansoft and ANSYS set out to integrate the world-class Ansoft electronic design analysis (EDA) products into the ANSYS portfolio, ANSYS customers can benefit immediately from improved and extended electromagnetics capabilities in release 12.0. A new family of 3-D solid elements for low-frequency electromagnetic simulation is included in the 12.0 release of ANSYS Emag software. Solid elements (SOLID236 and SOLID237) are available for modeling magnetostatic, quasistatic time harmonic, and quasi-static time-transient magnetic fields. Users can apply this new element technology to most low-frequency electromagnetic applications, such as electric motors, solenoids, electromagnets and generators.


Nonlinear transient rotational test rig solved in the ANSYS Workbench environment using SOLID236, SOLID237 and the new stranded conductor option (TEAM24 benchmark)

Explicit Dynamics - ANSYS has expended significant effort in the area of explicit dynamics for release 12.0 — including the addition of a new product that will make this technology accessible to users independent of their simulation experience. In addition, enhancements to both the ANSYS LS-DYNA and ANSYS AUTODYN products provide considerable benefits to their users. Newly introduced in ANSYS 12.0, ANSYS Explicit STR software is the first explicit dynamics product with a native ANSYS Workbench interface. It is based on the Lagrangian portion of the ANSYS AUTODYN product. The technology will appeal to those who require nonlinear dynamics simulation of solids, liquids, gases and their interactions. In addition, it will appeal to users who can benefit from the productivity provided by other applications integrated within the ANSYS Workbench environment. Those who have previous experience using ANSYS Workbench will find that they already know most of what is needed to use ANSYS Explicit STR.


High velocity impact of a steel ball on an brittle ceramic target confined by in a steel ring. Contour plot highlights damaged/cracked regions in the ceramic.






All Products
Capabilities Chart
Platform Support
Training
Contact

© 2009

Could you post the crack only
thanks

Could you post the crack only
thanks

I will do it later,,,,,

Please could post the link for the crack only
I need it urgently
It is very important as all my work is done with ansys
Djazakoum Allah koula kheir

this is the crack what you need

Please could post the link for the crack only
I need it urgently
It is very important as all my work is done with ansys
Djazakoum Allah koula kheir
if u had an e mail on yahoo just send me your email on privet or just the name


http://www.4shared.com/file/105497444/fef82aeb/ans12_licgen.html

[

I would like to thanks you for the file. It works
r_kechroud@yahoo.fr thanks a lot for the file
http://www.4shared.com/file/105497444/fef82aeb/ans12_licgen.html[/QUOTE]

[

I would like to thanks you for the file. It works
r_kechroud@yahoo.fr thanks a lot for the file
http://www.4shared.com/file/105497444/fef82aeb/ans12_licgen.html[/QUOTE]

thanks for your replay i add you as freind

السلام عليكم
لم استطع تحميل الجزء الثالث و هو الاخير لاستكمال التحميل
يرجى وضع رابط اخر اخي الكريم

السلام عليكم
لم استطع تحميل الجزء الثالث و هو الاخير لاستكمال التحميل
يرجى وضع رابط اخر اخي الكريم
اخي العزيز اعد تحميل الجزء الثالث او اخذ الجزء الثالث من اي مجموعة اخرى وليس من الضروري ان تحمل من مجموعة نفسها لان كل المجاميع بنفس التقسيم
اتمنى ان تضبط معك

شكرا علي هذا المجهود و الحقيقة الشكر مش كفاية و ياريت لو كتاب ansys workbench 12 + multi media disk يكون عندك و تضعوا لنا و ممكن نطمع منك في برنامج
audodesk inventor suite professional 2010 ,
عموما لك مني الف شكر